osmania UCEOU Logo
Home
PROF.NARSIMHULU SANKE                                                                         CoursesTaught       ME ThesisSupervision      PhotoGallary
Sanke
Name
Dr.NARSIMHULU SANKE
Designition

Professor 

Department of Mechanical Engineering,

University College of Engineering,

Osmania University. Hyderabad-500007.
Andhra Pradesh, India
Email

nsanke@osmania.ac.in

Contact No

+91- 40-27097346, 27682317

Areas of Interest

Biomass, New and Renewable Energy Sources, Heat Transfer, Applied Thermodynamics, Turbomachinery, Thermal Engineering,
Computer Programming in C and C++, Software Development, RDBMS, Web Technologies and Microprocessor and Its Applications

Degrees obtained (Univ. Year, Specialization)

S.No

Degree

University/Institute

Year of Passing

Specialization

1

B.E

Osmania University

1997

Mechanical Engineering

2

M.E

Osmania University

2000

Turbomachinery

3

PDIT*

ESCI-CMC, Hyderabad

2000

Computers, Information Technology

4

Ph.D

Osmania University

2014

Biomas Energy for Power Generation

Employment Record in Teaching
S.No

University

Designation

Period

1

Osmania University

Professor

2017 to Till date

2

Osmania University

Associate Professor

2014 to 2017

3

Osmania University

Assistant Professor

2001 to 2014

Other related experience in Research and Industrial (Employer, Position held, Period of work)

S.No

Organization Name

Worked as

Period of working

1

Telesis Technology Pvt.Ltd, Hyderabad

Programmer

1998 to 1999

2

CITP Technology for Transformation, Hyderabad/Bangalore

Software Engineer

1999 to 2001

  • Publications (Papers Published / Presented): 30
  • Paper Reviewed ICREPQ'09,10,11,12,13,14,15,16,17,18,
  • Number of M.E/M.Tech dissertations guided:55
Fellowship of academic body and Professional societies
  • Life Member, The Indian Society for Technical Education (ISTE)
  • Life Member, Solar Energy Society of India (SESI)
  • Life Member, Indian Society for Heat and Mass Transfer (ISHMT)
  • Life Member, National Society of Fluid Mechanics and Fluid Power (NSFMFP)
  • Life Member, Indian Society of Theoretical and Applied Mechanics (ISTAM)
  • Life Member, Osmania Graduate Association (OGA)
  • Mumber, Society of Automotive Engineers (SAEINDIA)
  • Member, Renewable Energy and Power Quality (Spain)
  • Member, World Acadamy of Science, Engineering and Technology (USA)

Countries Visited

  • Greece. Spain, China, USA and Canada
Short term courses organized / participated

S.No

Name of the Programme

Organizing Institute

Year

Organized / Participated

1

Computer Applications in Manufacturing Technology

Dept. of Mechanical Engineering, UCE,
Osmania University, Hyderabad

2002

Participated

2

Emission Controls and Latest Technologies in Internal Combustion Engines

Indian Institute of Technology, KANPUR
Kanpur

2002

Participated

3

Energy and Cryogenic Engineering

Vellore Institute of Technology, VELLORE (Deemed University)

2004

Participated

4

Nano Technology and Its Applications

JNTU - Hyderabad

2004

Participated

5

Mathematical Techniques for Industry with a Special Focus on Nanotechnology(CFD)

Indian Institute of Technology, KHARAGPUR

2005

Participated

6

Industrial Applications of Turbomachines

Indian Institute of Technology, Guwahati

2007

Participated

7

Spray and Combustion

Indian Institute of Technology, KANPUR
Kanpur

2007

Participated

8

Pedagogical Training (Module-I)

NITTTR, Chandigarh

2013

Participated

9

Faculty Development Programme in Entrepreneurship

Entrepreneurship Development Cell, Osmania University, Hyderabad

2013-2014

Participated

10

Management Capacity Enhancement Program for Adminstrators

Indian Institute of Management, Lucknow, Noida Campus

2015

Participated

11

Faculty Development Programme in Entrepreneurship (2- Weeks)

Entrepreneurship Development Cell, Osmania University, Hyderabad

April 18-30, 2016

Participated

Orientation Course organized / participated

S.No

Name of the Programme

Organizing Institute

Year

Organized / Participated

1

Orientation Course in Value Education (One Month)

UGC Academic Staff College,
Osmania University, Hyderabad

2003

Participated

Workshops organized / participated
S.No

Name of the Programme

Organizing Institute

Year

Organized / Participated

1

Working Principles of an Internal Combustion Engines and Latest Technologies

Dept. of Mechanical Engineering, UCE, OU.
For M/S Neo-Petcon Pvt. Ltd. Hyderabad

2003

Organized &
Resource person

2

Wind Energy & Energy Efficiency / Conservation

NEDCAP, Govt. of A.P Hyderabad

2004

Participated

3

Air Conditioning System Design and Energy Conservation

C.B.I.T – Hyderabad

2005

Participated

4

Responsive Manufacturing

DRDL – Hyderabad

2005

Participated

5

SUN Faculty workshop on Java Programming Language

APSCHE-NASSCOM, UCE,OU, Hyderabad

2007

Participated

6
Mission 10x Wipro Technologies Hyderabad
2008
Participated

7

User Acceptance Test (UAT) of Management Information System(MIS)

NPIU, TEQIP, SVB Hyderabad

October 18-21,2011

Participated

8

Quality Enhancement for Teachers of Engineering Education

Indian Institute of Technology, KHARAGPUR

November 16-17, 2011

Participated

9

Nano Technology and Its Applications (NANO-2012)

C.B.I.T- Hyderabad

February 27-28, 2012

Participated

10

FDP on New Technologies in Automotive Inductry

CII & Boach Ltd, Banglore

August, 04-06, 2014

Participated

11

Inductry-Institute and Defence Labs Interactoin

Dept. of Mechanical Engineering, UCE, OU.

August, 30, 2014

Participated

12

Furure of Indian AeroSpace "SoFIA 2015"

Indian Institute of Technology- Hyderabad

January, 23-24, 2015

Participated

13

How to write Research Proposal

University College of Engineering, OU, Hyderabad

September, 18, 2016

Participated

14

One day Induction Program

University College of Engineering, OU, Hyderabad

January, 20, 2018

Participated

International Training / Workshop

S.No

Name of the Programme

Organizing Institute

Duration

Organized / Participated

1

International Training Wokshop on technology and Utilization of Biomass Gasification

Department of International Cooperation , Ministry of science and Technology & LIER ,Yingkou , P.R .China

Nov 1st to Nov 20th , 2008

Participated

National and International Conferences attended and Presented Papers/e-Journal/Journal
  1. NarsimhuluSanke, Prof.D.N.Reddy, Dr.M.V.Ramana Murthy “An Experimental Investigation of heat recovery from Bio-mass energy”, National Conference on State of the Art of Technologies in Mechanical Engineering (NCSAME-2004), JNTU, Hyderabad, India. 29th - 30th June 2004.

  2. UpenderMiryala, NarsimhuluSanke, Dr.P.Mallesham, “Assessment of tool wear in Drilling using vibration and Force parameters for Tool Condition Monitoring”, NCSAME-2004, JNTU, Hyderabad, India. 29th - 30th June 2004.

  3. K.Ashok Kumar, NarsimhuluSanke, S.S.Prasad, “The use of Micro Turbine Generators in Hybrid Electric Vehicles”, NCSAME-2004, JNTU, Hyderabad, India. 29th - 30th June 2004.

  4. NarsimhuluSanke, GangaramShinde, UpenderMiryala, “Biomass fuel mix of Thermo Chemical Conversion for Gaseous Products on Pyrolytic aspects”, AIM-2005 (National Conference on Advances in Mechanical Engineering) 13th – 14th May, 2005. Vasavi College of Engineering, Hyderabad

  5. NarsimhuluSanke, “Biomass is an alternative Source fuel for Energy Generation” 2nd International Conference on Renewable Energy Sources and Energy Efficiency (ENERTECH 2007) 18-21 October 2007, Athens, Greece(funded by TEQIP,UCE,OU)

  6. NarsimhuluSanke, Dr.D.N.Reddy “Biomass for power and energy generationInternational Conference on Renewable Energy and Power Quality (ICREPQ’08) 12-14 March 2008, Santander, Spain.(funded by TEQIP,UCE,OU)

  7. NarsimhuluSanke(et,al) "Eucalyptus Globulus Waste as Fuel in a Power Plant" . International Conference on Renewable Energy and Power Quality (ICREPQ’09) 15-17 April 2009, Valencia, Spain.

  8. G.Srinivas Sharma, NarsimhuluSanke, D.N.Reddy, “Experimental Investigations of wood gasification in downdraft gasifier and prediction of gas composition using thermodynamic equilibrium model” International J.ofMultidispl.Research&Advcs. in Engg.(IJMRAE),ISSN 0975-7074, Vol. 3, No. IV (October 2011), pp. 297-312.

  9. Ameer Razzaq Noor, NarsimhuluSanke, "Design of solar absorption generator for Icemaker”, National Conference on Recent Advances in Mechanical Engineering (RAME-2012) 16-17 March 2012. Dept of Mechanical Engineering, Osmania University, Hyderabad.

  10. BalasemAbdulameerJabbar, NarsimhuluSanke, "Design and Modeling of horizontal axis wind turbine blade" National Conference on Recent Advances in Mechanical Engineering (RAME-2012) 16-17 March 2012. Dept of Mec.hEngg, Osmania University, Hyderabad.

  11. Bassam A Mohammed Hussein, NarsimhuluSanke, "Design and Modelling of dish collector for solar energy" National Conference on Recent Advances in Mechanical Engineering (RAME-2012) 16-17 March 2012. Dept of Mech.Engg, Osmania University, Hyderabad.

  12. RatnakarCh, NarsimhuluSanke, "Modelling and CFD analysis of an advanced biomass downdraft gasifier" National Conference on Advances in Mechanical Engineering (AIM-2012) 11-12 October 2012 Vasavi College of Engineering, Hyderabad.

  13. NarsimhuluSanke, RatnakarCh, “CFD simulation of an advanced biomass gasifier" National Conference on Advances in Mechanical Engineering (AIM-2012) 11-12 October 2012 Vasavi College of Engineering, Hyderabad.

  14. NarsimhuluSanke, RatnakarCh, D.N.Reddy,Computational analysis of advanced biomass downdraft gasifier” at the second IASTED International Conference on Power and Energy Systems and Applications (PESA 2012) 12 - 14 November 2012, Las Vegas, USA. (Secured best paper award), (funded by UGC)

  15. Ratnakar Ch,Narsimhulu Sanke " Flow analysis of an advanced biomass gasifier" Second International Conference on Emerging Trends in Engineering (ICETE-2013), 22-23 FEBRUARY 2013, Jaysingpur (Maharashtra), India.

  16. SalihMeriAbdulridha, Narsimhulu Sanke,“Performance analysis of parabolic trough collector for steam generation”, Journal Global Journal of Engineering Research and Technology (GJERT),ISSN 2249-3107, Volume 3, Number 2 (2013), pp 43-51.

  17. KumailAbdulkareemHadi,Narsimhulu Sanke,Temperature analysis of riser tubes in a solar flat plate collector”, Journal Global Journal of Engineering Research and Technology (GJERT), ISSN 2249-3107, Volume 3, Number 2 (2013), pp 53-58

  18. AhmedDheyaaJawad, NarsimhuluSanke, “Design and Modeling of a Two Stage Savounius Wind Turbine”,Journal Advances in Materials Science and Mechanical Engineering Research, Volume 1, Number 1(2014), pp.11-15.

  19. NarsimhuluSanke, D.N.Reddy, “Investigation on Biomass as Alternate Source for Power Generation” the International Conference on Energy, Biomass and Waste Engineering (ICEBWE 2014) May 12-13, 2014, Montreal, Canada(funded by TEQIP,UCE,OU)

  20. Mohammed Saad Abbas, Narsimhulu Sanke,"Performance analysis of flat plate collector with modified risers”, Global Journal of Engineering Research and Technology (GJERT), ISSN 2249-3107, Volume 4, Number 2 (July 2014), pp 93-98.

  21. Raad A Jawad, NarsimhuluSanke,"Effect of pitch angle on horizontal axis wind turbine”, Global Journal of Engineering Research and Technology (GJERT), ISSN 2249-3107, Volume 4, Number 2 (July 2014), pp 107-114.

  22. NarsimhuluSanke, D.N.Reddy, “The temperature influenced in the advanced biomass downdraft gasifier reactor of biomass fuels gasification for power generation” at the International Conference on Environment and Energy (ICEE-2014), 15-17 December 2014, Hyderabad, India, ISBN 978-93-81212-96-7

  23. NarsimhuluSanke, Md. KhaderShariff, “Design and analysis of an axial flow compressor”, at the National Conference on Emerging Trends in Mechanical Engineering (ETIME-2014) 29-30 December 2014, Dept. of Mechanical Engineering, Osmania University, Hyderabad, ISBN 978-9383635-55-9

  24. Mohammed MohsinShkair, NarsimhuluSanke, “ Solar flat plate collector heat transfer analysis in the raiser with helical fins”, International Journal of Engineering & Science Research (IJESR), ISSN 2277-2685, Vol-5, Issue-5 (May 2015), pp 352-356.

  25. Ali SalhSawadi, NarsimhuluSanke, “Performance analysis of winglet angles for horizontal axis wind turbine”, International Journal of Engineering & Science Research (IJESR), ISSN 2277-2685, Vol-5, Issue-5 (May 2015), pp 347-351.

  26. NarsimhuluSanke, Mohammed MohsinShkair, “Heat Transfer Analysis of a Riser Tubr in a Flat Plate Collector with Fins” International Journal & Magazine of Engineering, Technology, Management and Research (IJMETMR), ISSN 2348-4845, Volume No:2, Issue No:7 (July 2015), pp 163-167.

  27. NarsimhuluSanke, Ali SalhSawadi, “CFD Analysis of Winglets for Horizontal Axis Wind Turbine”, International Journal & Magazine of Engineering, Technology, Management and Research (IJMETMR), ISSN 2348-4845, Volume No:2, Issue No:7 (July 2015), pp 174-179.

  28. Vigneshwar N, NarsimhuluSanke, "Efficiency Estimation of the Turbocharger Compressor Wheel", International Journal of Scientific & Engineering Research (IJSER), ISSN 2229-5518, Volume 6, Issue 8 (August-2015), pp 195-198.

  29. D Mukherjee, NarsimhuluSankeEffect of length of a flat disk aero spike on the drag and thermal characteristic of flow over a blunt body”, International Journal of Emerging Technology and Advanced Engineering (IJETAE) ISSN 2250-2459, Volume 7 (September 2017).

  30. EGK Venkateswar Rao, NarsimhuluSankeModeling and Analysis of Air driven Turbine for Aerospace Applications”, International Journal of Emerging Technology and Advanced Engineering (IJETAE) ISSN 2250-2459, Volume 7 (October 2017).

Guest Letures/ Keynote Adress deliver
    1. Lecture deliveredon “Biomass Energy” at University of Cantabria,Santander, Spain on 18th March 2008.

    2. Lecture delivered on “Biomass is an alternate source of fuel for power and energy generation” at Liaoning Institute of Energy Resources (LIER), Yingkou , P.R.China on 15th Nov 2008.

    3. Keynote lecture delivered on “Biomass Potential for Power Generation in India” , International Level Symposium on Renewable Energy for Rural Development (ISORE-2010),February 25th -27th , 2010. Sangamner, India.

    4. Keynote lecture deliveredon “Biomass for Gasification” in One-day Regional Seminar on Trends in Renewable Energy Applications and Technologies, Organized by Department of Mechanical Engineering, MVSR Engineering College, Hyderabad and Sponsored by Ministry of New and Renewable Energy Govt. of India. On 4th February 2012.

    5. Lecture deliveredon “Non-Conventional Energy Sources (Solar, Wind and Biomass)” for Capsule course on Water & Energy Conversation & Economy in Tariff held at Chief Engineers (FY) Hyderabad (Military Engineering Services) on 25 June 2012.

    6. Lecture deliveredon “Internet for Society” for the participants of the Refresher Course in Information Technology, organized by the UGC-Academic Staff College, Osmania University, on 05 July 2012.

    7. Lecture deliveredon “Internet for Society”, in the Refresher Course in Information Technology, organized by the UGC-Academic Staff College, Osmania University, Hyderabad, on 24th –July-2013.

    8. Two lectures delivered in the Refresher Course on "Emerging Trends in Renewable Energy Sources &Energy Management" (June 9-28, 2014) at UGC-Academic Staff College, JNTUH Kukatpally, Hyderabad, on June 17, 2014.

      Solar-Wind Hybrid Power Systems

      Biomass and Its Technologies for Power Generation.

    9. Extension lecture delivered on “Sustainable Energy for Sustainable Development” on November 29, 2014 at KeshavMemorial Institute of Commerce &Sciences,Hyderabad.

    10. Expert lecture on “Solar, Wind, Biomass energies applications” in one week faculty development program, during September 27 – October 2, 2016. Organised by Aditya Institute of Technology and Management, Tekkali..

    11. Guest lecture on “Non-Conventional Energy Sources” at CMR College of Engineering & Technology, Hyderabad, on August 11, 2017.

    12. Invited lecture on “Research Potential in Biomass for Rural India Power Generation” in one week faculty development program on Recent Trends in Mechanical and Industrial Engineering (RTMIE – 2017) during December 11-15, 2017. Organized by Dept. of Mechanical Engineering, MVSR Engineering College, Hyderabad.          

Organizing Member/Secretary
  1. Committee Member of National Conference on Computational Methods in Mechanical Engineering (COMPUTIME) September 16-17, 2005.

  2. Committee Member for One-day workshop on Advances in Computational Structural Mechanics and Fluid Flows (COSMECFLOWS) December 5th, 2005.

  3. Committee memberInternational Conference on “International Congress on Renewable Energy” (ICORE 2006) February 8-11, 2006 at Hyderabad International Convention Centre, Hyderabad.

  4. Organizing Secretary "ENVISAGE – 2006" Three day National Level Technical Festival has conducted, during April 3-5, 2006.

  5. Organizing Secretary "ENVISAGE – 2007" Three day National Level Technical Festival has conducted, during January 19-21, 2007.

  6. Organizing Secretary "ENVISAGE - 2008" Two day National Level Technical Festival has conducted, during January 11-12, 2008.

  7. Committee Member of the 53rd Congress of Indian Society of Theoretical and Applied Mechanics (ISTAM-2008) December 27th–30th, 2008.

  8. Organizing SecretarySamskruthi -2009” One day cultural festival has conducted at Univ. College of Engineering, Osmania University, Hyderabad, during 28 March 2009.

  9. International Scientific Committee Member, International Conference on Renewable Energy and Power Quality, Spain, since 2009.

  10. Co-Convener, International Conference on “Reforms in Technical Education-Global Trends” (ICORTE 2010) August 27-28, 2010. Organized by the Dept. of Mechanical Engineering, University College of Engineering, Osmania University, Hyderabad, India.

  11. Convener,National Conference on “Recent Advances in Mechanical Engineering” (RAME-2012) 16-17 March 2012. Dept of Mechanical Engineering, Osmania University, Hyderabad.

  12. Organizing SecretaryQizzateck-2013” quiz finals has conducted at Univ. College of Engineering, Osmania University, Hyderabad, on 23 March 2013.

  13. Organizing SecretaryQizzateck-2014” quiz finals has conducted at Univ. College of Engineering, Osmania University, Hyderabad, on 22 March 2014.

  14. Organizing SecretarySamskruthi -2014” One day cultural festival has conducted at Univ. College of Engineering, Osmania University, Hyderabad, during 23 March 2014.

  15. Convener, National Conference on Emerging Trends in Mechanical Engineering (ETIME-2014) 29-30 December 2014, Dept. of Mechanical Engineering, Osmania University, Hyderabad.

  16. Organizing SecretaryQizzateck-2015” quiz finals has conducted at Univ. College of Engineering, Osmania University, Hyderabad, on 23 March 2015.

  17. Organizing SecretaryFreeStyle 2015” (for B.E I/IV) one day programme has been conducted at Univ. College of Engineering, Osmania University, Hyderabad, on 11 May 2015.

  18. Organizing SecretaryQuizzotic-2016” conducted quiz finals comprises a spectrum of areas encompassing the latest developments both technical and non-technical arena, at University College of Engineering, Osmania University, Hyderabad on March 21, 2016.

  19. Organizing SecretaryFreeStyle-2016” (for BE First years) one day Programme conducted at University College of Engineering, Osmania University, Hyderabad on April 19, 2016.

  20. Organizing Committee member, International Conference on Advances in Materials and Manufacturing (ICAMM-2016), December 8-10, 2016, jointly organized by Department of Mechanical Engineering, Osmania University and DRDL, DRDO, Hyderabad.

  21. Organizing SecretaryQuizzotic-2017” conducted quiz finals comprises a spectrum of areas encompassing the latest developments both technical and non-technical arena, at University College of Engineering, Osmania University, Hyderabad on March 25, 2017.

  22. Organizing SecretaryFreeStyle-2017” (for BE First years) one day Programme conducted at University College of Engineering, Osmania University, Hyderabad on April 15, 2017.

  23. Organizing Committee member, International Conference on Advances in Materials and Manufacturing (ICAMM-2016), December 8-10, 2016, jointly organized by Department of Mechanical Engineering, Osmania University and DRDLDRDO, Hyderabad.

  24. Organizing Committee member, 62ndCongress of Indian Society of Theoretical and Applied Mechanics (ISTAM-2008) December 15-18, 2017.

  25. Organizing SecretaryQuizzotic-2018” conducted quiz finals comprises a spectrum of areas encompassing the latest developments both technical and non-technical arena, at University College of Engineering, Osmania University, Hyderabad on March 24, 2018.

  26. Organizing SecretaryFreeStyle-2018” (for BE First years) one day Programme conducted at University College of Engineering, Osmania University, Hyderabad on April 07, 2018.

Social Programs
  1. Participated in National Renewable Energy Day 2005

  2. One of the organizing members of National Renewable Energy Day 2006.

  3. Participated in TelanganaHarithaharam on July 11, 2016 and July 07, 2017

 
Awards/Honors
  1. Recognized as Top 100 Scientists 2009, International Biographical Centre, CAMBRIDGE, ENGLAND.

  2. 2000Outstanding Scientists 2008/2009, International Biographical Centre, CAMBRIDGE, ENGLAND

  3. Received BEST PAPER AWARD, “Computational analysis of advanced biomass downdraft gasifier” at the second IASTED International Conference on Power and Energy Systems and Applications (PESA 2012) 12 - 14 November 2012, Las Vegas, USA.

 
ADMINISTRATIVE PROFILE
    1. In-Charge of time-tables, (UG & PG)(Regular & Part-time Courses) Department of Mechanical Engineering, University College of Engineering (Autonomous), Osmania University, Hyderabad. June 2002 to June 2007.

    2. Officer In-Charge, Automobile Engineering Section, Osmania University, Hyderabad, June 2003 – July 2004

    3. In-Charge for Conducting M.E (Mech) Main Examinations during 2003-2004, Dept. of Mechanical Engineering, University College of Engineering (Autonomous), Osmania University, Hyderabad.

    4. Department Convener for M.E/M.Tech Admissions 2004-2005, Department of Mechanical Engineering, Osmania University, Hyderabad.

    5. Officer In-Charge, Computer Laboratory, Dept. of Mechanical Engineering, University College of Engineering, Osmania University, Hyderabad, since  July 2004.

    6. Member, TEQIP – Purchases Committee, Dept. of Mechanical Engineering, University College of Engineering, Osmania University, Hyderabad, January 2005 to June 2008.

    7. Department Convener for M.E/M.Tech Admissions 2005-2006, Department of Mechanical Engineering, Osmania University, Hyderabad.

    8. Director, Centre for Creative Technologies, University College of Engineering (Autonomous), Osmania University, Hyderabad, October 2005 to till date.

    9. Coordinator&Asst.Chief Superintendent, B.E & M.E Main Examinations, University College of Engineering, Osmania University, Hyderabad, March 2006 to August 2016.

    10. Director, Centre for Energy Technology, University College of Engineering (Autonomous), Osmania University, Hyderabad since August 2008.

    11. Faculty Advisor, “SAEINDIA Collegiate Club” Univ. College of Engineering, Osmania University, Hyderabad, from 2010 to 2016.

    12. Student Advisor, University College of Engineering (Autonomous), Osmania University, Hyderabad since October 2009.

    13. Website In-Charge, University College of Engineering (Autonomous), Osmania University, Hyderabad from July 2009 to June 2012.

    14. Faculty Advisor, ME Turbomachinery Course, Dept. of Mechanical Engineering, University College of Engineering, Osmania University, Hyderabad, since August 2011.

    15. Departmental Committee Member, Dept. of Mechanical Engineering, University College of Engineering, Osmania University, Hyderabad, 2011 to 2016

    16. Board of Studies Member, Dept. of Mechanical Engineering, University College of Engineering, Osmania University, Hyderabad since 2011.

    17. In-charge, College Automation, UCE, OU since September 2012 – September 2013.

    18. Member, Board of Studies in Mechanical Engineering, Malla Reddy Engineering College (Autonomous), Hyderabad. Since April-2015.

    19.  Assistant Controller of Examinations (EDP), Osmania University, Hyderabad, July 27, 2016 to November 23, 2016.

    20. Assistant Controller of Examinations (Professional-I), Osmania University, Hyderabad November 24, 2016 to June 05, 2017.

    21. Departmental ResearchCommittee Member, Dept. of Mechanical Engineering, University College of Engineering, Osmania University, Hyderabad, since December 2016.

    22. Additional Controller of Examinations (Professional-I), Osmania University, Hyderabad, since June 06, 2017.

Programs are conducted from Centre for Creative Technologies at University College of Engineering, Osmania University, Hyderabad

S.No

Fest Name

Month & Year

Role

Funded by

1

ENVISAGE-2006

April 2006

Organizing Secretary

TEQIP,UCE,OU

2

ENVISAGE-2007

January 2007

Organizing Secretary

TEQIP,UCE,OU

3

ENVISAGE-2008

January 2008

Organizing Secretary

TEQIP,UCE,OU

4

Samskruthi-2009

March 2009

Organizing Secretary

UCE,OU

5
Samskruthi-2014
March 2014
Organizing Secretary
UCE,OU